User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Wavetek 166:50 MHz Pulse/Function Generator
DATE:                  01-May-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       30
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  IEEE         [@1281] *RST
  1.002  ASK-                        P                            F
  1.003  ASK+                                          X
  1.004  HEAD         ΝΝ INITIAL CONDITIONS ΝΝ
  1.005  DISP         Connect the UUT to the appropriate power source
  1.005  DISP         and allow a « hour warm-up.
  1.006  CALL         Wavetek 166 Sub Procedure 1
  1.007  CALL         Wavetek 166 Sub Procedure 2
  1.008  HEAD         {}
  1.009  DISP         {ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»}
  1.009  DISP         {Ί THIS COMPLETES THE VERIFICATION Ί}
  1.009  DISP         {ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ}
  1.010  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  2
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.